instax printer mini link

– instax printer with charger cord
Recording method
3-color exposure with OLED
Film used
FUJIFILM INSTAX Mini Instant Film
(sold separately)
Image size
2.4 in × 1.8 in / 62 mm × 46 mm
Exposure pixel count
800 × 600 dots
Exposure resolution
12.5 dots/mm
(318 dpi, 80 μm dot pitch)
Exposure gradation
RGB gradation of 256 colors
Interface
Bluetooth Ver. 4.2 (BLE)
Printable image format
JPEG, PNG, HEIF, DNG
Printing time
Image recording – photo output (fed out):
Approximately 15 sec.
Possible number of printed images
Approximately 100
(from full charge; the number of prints depends on usage conditions)
Power supply
Lithium-ion battery (internal type: not removable)
Charging time
Approximately 80 to 120 minutes
(depending upon environment temperature at the time of charging)
Power consumption
Approximately 3 W
Operating environment
Temperature: +41 ºF to +104 ºF (+5 ºC to +40 ºC )
Humidity: 20% to 80% (no condensation)
Main unit dimensions
3.6 in × 1.4 in × 4.9 in / 91.9 mm × 36.4 mm × 124.8 mm (excluding projecting parts)
Main unit mass
Approximately 0.46 lbs / 210 g (excluding film pack)
Supplied accessory
Micro USB cable
( BOD700-200, Length: 11.8 in / 30 cm )
Declaration of conformity
FCC_Declaration of conformity_FI023W(mini Link 2)
EU_Declaration of conformity_FI023W(mini Link 2)
UK_Declaration of conformity_FI023W(mini Link 2)